Taking out the dinette from your travel trailer may be a challenging job. It’ll take additional time, and you should plan for it when starting to re-decorate, where you can remove the table and put it back in again.
This means that planning is all-important, as you want to get this right the first time, so don’t rush. Here is how to remove dinette from travel trailer.
This project is not overly complicated. But should you want to save yourself more time and effort, a qualified person can quote you for doing this job. If you decide to do it yourself, remember to follow these steps.
When redecorating your booth, you’ll want to remove the table first, so take a seat and gather your tools! You’ll need to flip the table over to get to the screws that are keeping it together – you can use specialist equipment, but bring anything you think you’ll need.
These screws may be a little more difficult to remove because they’ve been holding the table in place for a long time. They may require some force, so be prepared! However, after a few turns, you should have unscrewed them sufficiently to remove your old piece of furniture and replace it with something different.
It would be best to keep all the screws you just removed if you want to sell the old dinette later. As some of them will be tailor-made by the manufacturers, the mass-market fasteners may not be suitable.
Once you have removed the insert for the table, you will want to detach the frame from that section. You can then move on to taking out the cushions from the seat itself.
From here, you will want to press a lever to release each of the slats in the back that were directly behind where your cushions sat previously.
Now take out any parts that weren’t screwed in. Depending on the design, you will have many different parts that need to be removed.
Now, the screws are out. Take the bench cushions out of this room through the door. They can be folded and, and you can easily replace them with a few new ideas below.
When you’ve assembled the materials, begin by removing any loose parts. Not everything you need may come in completely assembled. Don’t panic if some pieces feel loose when you use them – remember to apply pressure evenly and often test so that the materials don’t fall prey to gravity!
Turn your RV dinette into a stylish and comfortable dining area. It is the perfect solution for people who camp a lot or use their RV as an office or studio.
This combination is lightweight, easy to assemble, pack up, and store away when you need it again. Plus, no matter what you’re doing, it’ll match!
You can insert new cabinets to utilize better space, including a pantry closet next to the stove.
So, when it comes to “how to remove a dinette from a travel trailer”, you should be able to follow the above steps. Removing your table from your trailer will take a bit of additional time and planning, but if you take your time with it and do it correctly, you should be left with a better-looking interior and a great space to chill out.
We hope you will successfully re-decorating your trailer. Thank you for taking your time.